Pump types
Gear pump
By default, we have always equipped temperature control units that use oil as the heat transfer medium with gear pumps. This has decisive advantages for the operator and can eventually boost the customer’s component quality.
The use of gear pumps in our temperature control unit has a long history. For decades, we have further developed the gear pump design so that today we have three variants of those pumps. The gear pump consists of three pump plates and a set of toothed gears that are screwed together without seals. This simple design enabling easy maintenance and repair and the resulting maximum efficiency have led to the gear pump being held in high esteem among our customers. Our gear pump is currently produced in the variants of 16 l, 30 l and as a double pump with 2 x 16 litres. Thanks to its very steep characteristic curve, our gear pump is also suitable for a permanent supply of tubes having a diameter of up to 4 mm. The design allows for the gear pump to be continuously run at, e.g., 350 °C in leak stop operation, while it can also be used for sucking the heat transfer medium out of the tool.
- Application: Immersion pump in temperature control unit
- Max. 16 l/min flow rate
- Max. 160 m delivery height
- Heat transfer oil and water/glycol
- Application: Immersion pump in temperature control unit
- Max. 30 l/min flow rate
- Max. 130 m delivery height
- Heat transfer oil and water/glycol
- Application: Immersion pump in temperature control unit
- Max. 2 x 16 l/min flow rate
- Max. 130 m delivery height
- Heat transfer oil and water/glycol
Accessories for temperature control units
Accessories for temperature control units
Service products
Flowmeters and decalcification pumps keep processes running smoothly.
Connection accessories
Thermal tubes, pipes and connection fittings.
Heat transfer oils
Our heat transfer oils thermobiehl 500 and 700 ensure optimum performance and efficiency.
Other accessories
Neutralising lye, descaler, rust inhibitor and casting mould cleaner.